Forums Horror Collectibles
LIFESIZED 5FT Tall Coffin for customer...

Just finished this piece tonight... I had a local costumer come up to me sometime a week ago and asked me if there was any way I could build a 5 foot tall coffon that looked old and very much used... I told her, "No Problemo"... So I built this out of 1/2" plywood, Ferring strips for the frame and then when it was finished I cut out peices with a jigsaw down towards the bottom of the lid and a few on the de for good measure... I then weathered it to make it look like it suffered through some water damage... This is the biggest project that I have done so far and I am pretty pleased with the results...

Anyway On with the pics...

Harry Warden Thursday 10/15/2009 at 05:21 AM | 56274 eyes hurt...nice! really nice!
Klempo Thursday 10/15/2009 at 12:51 PM | 56282
Very nice!

The weathering at the bottom really sets it off.

Every time I look at the pics I think of Return of the living Dead.
Thorn Thursday 10/15/2009 at 07:36 PM | 56302
I've been wanting to see that!! Very awesome Ryan, your customer will be very happy!

I love the type of wood you used. Really sets off a clascal horror vibe. Thanks for sharing!
kaizu Saturday 10/17/2009 at 10:18 AM | 56423
Very nice looking piece Ryan and if they are not happy then they are an idiot.
cropsy Saturday 10/17/2009 at 10:56 AM | 56429
Thanks guys! The wood I used was just reg plywood, but I used a tortch to burn it so that it would should all the grains and what not.

Harry Warden Saturday 10/17/2009 at 07:11 PM | 56452